DTP Technical Specifications

DTP-S1F

DTP-S1i

SCSI and Fibre Channel

SCSI and iSCSI

400 MB/sec

210 MB/sec

Dual Ultra 160 LVD/SE SCSI interfaces

Auto-negotiate speed and type with all LVD and Single-Ended devices:

• SCSI 1 (Async at 1.5 MB/sec and Sync at 5 MB/sec)
• SCSI 2 (Fast SCSI at 10 MB/sec and Wide SCSI at 20 MB/sec)
• Ultra SCSI at 20 MB/sec
• Ultra Wide SCSI at 40 MB/sec
• Ultra 2 Wide SCSI at 80 MB/sec
• Ultra 160 SCSI at 160 MB/sec

Physical connectors: 68-pin VHDCI.

Supports all SCSI commands, including all vendor-specific extensions.

SCSI tagged command queuing.

Automatically recognizes any type of SCSI devices, including disk, tape, media changers, optical, etc.

Single (DTP-S1F) or Dual (DTP-S1F-D) interfaces.

• 2.125 Gbps each, backwards compatible with 1.063 Gbps
• Full duplex communications
• Supported topologies: Point-to-Point, Arbitrated Loop (FC-AL) and Fabric (FC-SW)
• Class 3 connection (SCSI-FCP)
• Multi-mode optical interface
• LC connector(s).

Fibre Channel interface not included with this model.

iSCSI capability not included with this model.

Dual 1 Gbps Ethernet.

Backwards compatible with 100 Base-T and 10 Base-T.

RJ-45 copper connector for standard
Cat-5/5e/6 cabling.

iSCSI Protocol Revisions supported:

• Draft 8
• Draft 20 (current iSCSI spec)

Client Authentication methods:

• CHAP MD5
• SRP

10/100/1000 RJ-45 Ethernet for ssh (encrypted secure shell) and https (encrypted web) access.

DB-9 serial connector for local terminal access.

Command-Line Interface for advanced configuration and reporting.

Web-based Graphical User Interface for easy and secure configuration from anywhere on the network.

DHCP for easy installation and network administration.

Field-upgradeable firmware.

Width: 16.89”; Height: 1.72” (1U); Depth: 27.8”